BRETTUNS VILLAGE
LEATHER

RIVETS




We now carry a high quality line of copper rivets and burrs - wow!  Just click on the picture, please


Black Steel Tubular or Post Rivets
Several Sizes

These are old stock steel tubular rivets with a tube diameter of 1/8" and head diameter = 3/8".
Available in the lengths shown.  These work best when the tube is about 1/8" longer than the entire thicknes you're going through.
Slightly rounded heads.  We sell these in bags of 100 for $10, delivered to any USA location.
Backing washers included so you can use them if you feel like it.
Set them in a hand press, machine press, or with a splash tool.
100 Black Post Rivets, 5/8"  RVT102 

100 Black Post Rivets, 9/16"  RVT103 

100 Black Post Rivets, 1/2"  RVT104 

100 Black Post Rivets, 7/16"  RVT105 

100 Black Post Rivets, 5/16"  RVT106 


Nickel-Plated Steel Semi-Tubular 9/16" Rivets

These are old stock nickel-plated steel tubular rivets with a shaft length of 9/16", tube diameter = 1/8", and head diameter = 5/16".
The head is slightly domed.  The shaft is hollow only about 1/4" in,
so these are useful for joining together stuff that ends up with a total thickness of 7/16".
We sell these in in bags of 100 for $10, delivered to any USA location.
Nickel-Plated Semi-Tubular Rivets, 9/16"
RVT110
$10 per 100 



Zinc-Plated Steel Tubular Rivets

Zinc-plated steel post or tubular rivets have a head diameter of 3/8" with a slight dome on top, and the shaft of the rivet is 1/4" long by 3/16" in diameter.
Use these for joining layers that are about 1/8" thick (for example, two pieces of 4 oz leather).
A half-pound bag contains about 200 of these.  Ten bucks will do it.  USA shipping included.
Zinc-Plated Rivets, 1/4"
RVT111
$10 per 1/2-pound bag


Antique Brass-Plated Steel Tubular Rivets

These are steel post or tubular rivets that have a head diameter of 3/8" with a slight dome on top, and the shaft of the rivet is 1/4" long by 3/16" in diameter.
Finished with a wash of antique brass to give them a tarnished look.  Very cool.  Use these for joining layers that are about 1/8" thick (for example, two pieces of 4 oz leather)
or for attaching metal plates to your sword-whacking attire.  A half-pound bag contains about 200 of these.
Ten bucks to your door, because, as you should know on this website, USA shipping is included.
Antique Brass-Plated Rivets, 1/4"
RVT112
$10 per 1/2-pound bag


Heavy Duty Brass-Plated Steel Tubular Rivets

These are steel post or tubular rivets that have a head diameter of 3/8" with a slight dome on top, and the shaft of the rivet is 3/8" long by 3/16" in diameter.
Finished with a plating of bright brass to give them a shiny gold look.  Use these for joining layers that are about 1/4" thick (for example, two pieces of 8 oz leather).
A half-pound bag contains about 10 of these, but if you look at the photo you'll notice that there are some small eyelets and rivet posts mixed in
(we received this batch that way), so we're selling 9 oz for the same price as a half pound.  $10 per 9 oz bag, USA shipping is included.
Bright Brass-Plated Rivets, 3/8"
RVT113
$10 per 9 oz bag


Gunmetal Brass Post Rivets

These are brass post rivets, hollow stem, meant to be set with a splash anvil or a tool like the ones we sell on our Tools page.
Head diameter is 5/16", tube length is 5/16", tube diameter is 9/64".  We sell these in 1/2-pound bags - about 380 rivets - for $15.00,
which includes postage costs if you're in the contiguous 48 states.  Color is called 'dark gunmetal, which is almost black.
Gunmetal Post Rivets
RVT114
1/2 pound for $15.00
Or, get a full pound for $27.00
Free shipping in the 48 states
Please select:

Don't want to use your credit card online?  No problem - print out our order form and mail it in with a check, or call an order in using our toll-free number:  1-877-532-8424


Don't forget to get a tool so you can set your rivets!
See our Tools page


Double-Headed Rapid Rivets

Double-headed rivets look nice from either side of your project, which is handy if your bronco bucks you off and you land in a way that places your head inside your chaps.
You'll open your eyes, and right then and there you'll be glad you used double-headed rivets.  They look nice from any angle.
Set these with one of those round metal rods that has a convex end (so it won't squish the cap down), and use a concave anvil to keep the other end rounded too.

These black rivets have a shaft length of 7/16" and are good for joining stuff that has a total thickness of 5/16" to 3/8" (20 oz to 24 oz total thickness)
Black Double Cap Rivets  Pack of 100  $6.00 RVT117 

Don't want to use your credit card online?  No problem - print out our order form and mail it in with a check, or call an order in using our toll-free number:  1-877-LEATHAH



Semi-Tubular Rivets - Stainless Steel or Aluminum
Solid shaft, very sturdy aircraft-grade rivets with just enough of a tube at the end to set them in place

Stainless Steel

Stainless steel semi-tubular rivets have these dimensions:
1/8" in diameter, 7/32" head diameter, 3/8" long shaft (from under the head to the end of the tube), 1/8" hollow length inside tube

Takes about 1/8" to set one of these with your splash tool (or the ones we sell on the Tools page),
so these rivets are useful for joining stuff that ends up with a total thickness of 1/4" (14 to 16 oz of total leather thickness)
RVT118
$5 per 100 

USA shipping included


Aluminum 11/32" Semi Tubular Rivets

Aluminum semi-tubular rivets have these dimensions:
1/8" in diameter, 7/32" head diameter, 11/32" long shaft (from under the head to the end of the tube), 1/8" hollow length inside tube

Takes about 1/8" to set one of these with your splash tool (or the ones we sell on the Tools page),
so these rivets are useful for joining stuff that ends up with a total thickness of 7/32" (12 to 14 oz of total leather thickness)
RVT119
$5 per 100 

USA shipping included



Aluminum 5/8" Semi Tubular Rivets

Aluminum semi-tubular rivets have these dimensions:
1/8" in diameter, 7/32" head diameter, 5/8" long shaft (from under the head to the end of the tube), 1/8" hollow length inside tube

Takes about 1/8" to set one of these with your splash tool (or the ones we sell on the Tools page),
so these rivets are useful for joining stuff that ends up with a total thickness of 1/2" (30 to 32 oz of total leather thickness)
RVT120
$5 per 100 


USA shipping included

Aluminum Brazier Rivets

Aluminum brazier head rivets are solid (not hollow) and have these dimensions:
3/32" in diameter, 1/4" head diameter, 1/4" long shaft (from under the head to the end of the tube).
Made by Reynolds Aluminum Co.  If you're not sure how to set these then they may not be the rivet you're looking for.
Sold in packs of 50
RVT115
$5 per pack, USA shipping included


Small Tubular Rivets

Nickel-plated steel rivets have hollow shafts and have these dimensions:
The post is 3/32" in diameter and 3/16" long.  3/16" head diameter.
Easy to set with a splash tool.
Sold in packs of 100
RVT116
$5 per 100 USA shipping included


Hex Dome Rivets

Small decorative head rivets are nickel-plated steel and are meant to be set with a splash tool.
Sold in bags of 50, $5 per bag, USA shipping included.
RVT-107



Square Rivets

Small square head rivets are nickel-plated steel and are meant to be set with a splash tool.
Sold in bags of 50, $5 per bag, USA shipping included.
RVT-108


3/4" SOLID BRASS RIVETS

These heavy duty rivets are best used by someone that already knows how to set them.  These require a special setting tool and a pretty hefty whack.
By that we mean a mighty blow with a hammer, the likes of which may never have been seen before in your living room.  These are solid brass, 3/4" shaft length, 3/16" body diameter.
The head is 0.335" and it sticks up 0.140" at the peak of its little dome that you see up there.
Sold per 10, 100, or 1,000.  Don't know how to set 'em?  No problem; these make a great display item - just put some out in wooden bowls around the living room and call it a statement.
Solid Brass 3/4" Rivets
RVT121
$4 for 10

Don't want to use your credit card online?  No problem - print out our order form and mail it in with a check, or call an order in using our toll-free number:  1-877-532-8424



7/16" SPLIT RIVETS

These brass-plated steel split rivets are easy to set (poke through, bend the ends - or you can use a special tool to set them).  These have a flower-shaped head for a decorative effect.
The shaft is about 1/8" in diameter and 7/16" long.  The head is 1/4" across.  Nice quality split rivets.
RVT123
7/16 Split Rivets  $5 per 100, USA shipping included

9/16" Split Rivets

Same as above, but these are a little longer
The shaft is about 1/8" in diameter and 9/16" long.  The head is 1/4" across.  Nice quality split rivets.
RVT124
9/16 Split Rivets  $5 per 100, USA shipping included



#9 Copper Rivets and Burrs
Sold in 1-pound boxes or 10 packs

Copper rivets and burrs are available in 4 lengths:  3/4", 1", 1-1/4", 1-1/2"
The burr is that washer thing that goes on the back (post) of the rivet.  Set these with a tool that
you tap with a mallet to push the washer down into place, and then mash the end of the rivet over.
If you need a tool to set these you might want to check out our own line of copper rivet setters over on the tools page, here.
RVT125
All prices include USA shipping
3/4" Copper Rivets and Burrs  $24 per pound (about 115 per lb)
1" Copper Rivets and Burrs  $24 per pound (about 100 per lb)
1-1/4" Copper Rivets and Burrs  $24 per pound (about 85 per lb)
1-1/2" Copper Rivets and Burrs  $24 per pound (about 75 per lb)
Sizes

If you'd like an assortment of all four sizes (or any other combination) just include a note with your order and we'll take care of it.





All Prices Include Continental USA Shipping!  AK and HI are just a little more - send an e-mail to inquire.
Or click here for more shipping information - APOs, International Shipping, Express, Overnight, etc.

Don't want to pay online with a credit card?   No problem - just print out our order form and mail it in with a check, or call an order in using our toll-free number:  1-877-532-8424.
You can also e-mail your order and just mail us a check.  We'll ship the order when your check arrives.

Want to know when we add new items to our inventory?  Sign up for our free newsletter:
Register for BrettunsVillage.Com email updates
by clicking here

HOW TO PLACE AN ORDER
You Have Several Choices: Mail, Fax, Phone, or Online Shopping Cart

Placing an Order - Choice #1:

We've tried to make this as easy as possible.  Print out this order form and send it up with a check or with your Visa/Mastercard info (number and expiration date).
Can't print the form?  No problem, just write your order down on a piece of paper and mail it in, fax it in, or call it in.  You can order leather pieces, laces, buckles, etc all on one form or piece of paper, just add it all up.
Don't forget your shipping address (no P.O. Boxes, please, unless your order is going to weigh less than two pounds).  We'll get your order out as soon as possible.
All prices on our site include shipping charges for locations within the 48 states, and, at Brettuns Village, we do not charge for handling your order.  Just doesn't seem fair!
---
Brettuns Village Leather
P.O. Box 772
Auburn, ME 04212
(207)782-7863
Fax: (207)782-7448



Placing an Order - Choice #2

Use your Visa/MasterCard/Amex/Discover by telephoning your order in

TOLL FREE, ORDERS ONLY: 1-877-LEATHAH  (That's how we say it in Maine)

1-877-532-8424    ORDERS ONLY, PLEASE!
---



Placing an Order - Choice #3
Use our shopping cart system by clicking the buttons next to each item.
When ready to check out, you'll have the option of paying with a PayPal account or just using your Visa, MasterCard, American Express, or Discover card.

Any questions?  Send an e-mail

RETURN TO BRETTUNS VILLAGE LEATHER'S HOME PAGE