BRETTUNS VILLAGE TRUNK SHOP

TRUNK HINGES AND EDGE BANDING



REPRODUCTION 1880 TRUNK HINGES - LARGE OR SMALL
Reproduction trunk hinges
These steel reproductions of old 1880s-style trunk hinges are very well made, with a bit of a bend to fit over your
trunk's dust banding.  Excellent reproductions, but they cost an arm and a leg to fabricate.
Overall length is 6-1/2", width is 1-1/2".  The bottom part (longer end) is 3-3/4" long, the other
end is 2-3/4" long.  HNG09  $12 each, USA shipping included  SOLD ONE AT A TIME!!


Replacement hinges for old trunks
Steel reproductions of old 1880s-style trunk hinges are very well made.
Excellent reproductions, but they cost an arm and a leg to fabricate.
Overall length is 4-1/16", width is 1-5/16".
HNG15   $9 each, USA shipping included    SOLD ONE AT A TIME!!



Nickel-Plated Plated Old Stock Foot Hinges
Original old stock hinges from the 1930s, never been used
Old case hingesHinges for antique trunks
These hinges work well on brief cases, suitcases, and small trunks, which is how they were being used in the factory where we bought them.
Measuring 3.25 inches long by 1.125 (1 and 1/8) inches wide, and they have a 'bump' on them that serves as a foot for the case when stood on end.
Made in the 1930s, original old stock.  These are not reproductions.  Available in a limited supply and when they're gone they're gone.
Only nickel available - sold out of brass.  Sold by the pair (two complete hinges) for $8.00, which includes postage to any USA location.
Nickel Foot Hinges, $8.00 per pair  HNG-03


Small Hinges
Jewelry box hardware
Small brass-plated steel hinges are useful for the thin wood doors on the underside of the lids of many trunks, or for small boxes.
These are 1-5/8" long by 1-5/16" wide.  Small Hinges $5 per pair  HNG04


Butterfly Hinges
Brass hinges
Brass-plated steel hinges with the characteristic style of late 1800 cabinet makers.  Maybe.
These are 3-3/16" long by 1-7/8" wide.  Butterfly Hinges $6 per pair  HNG05



Stop Hinges
Stop hingesHinges for boxes and casesVintage box and case hardware
Brass-plated steel or black hinges will open up about 90 degrees and then they stop right there.
Best used on trunks that are 25 inches wide or smaller - so there's not too much weight in the lid.
These are 3-1/4" long by 1-1/2" wide.  Choose brass-plated steel or black anodized steel.
Stop Hinges $6 per pair  HNG06
Finish


Antique Brass Finish Trunk Stop Hinges
antique brass trunk lid hinges for sale
HNG-16 is a nice, sturdy stop hinge - it only allows the lid to go to 90 degrees.  Nice, antique brass finish matches our
other antique brass finish parts (locks, drawbolts).  Requires 5 nails or screws to attach, per hinge.  Width is 1.5", height is
2.5", and the hinge sticks out from the body of the trunk by about 1/8".
HNG-16, sold in pairs, 2 hinges per pack, for $10 flat, USA shipping included.


Bright Brass Small Stop Hinges
hinges for wine boxes for sale
Our HNG-19 is a small, brass-plated steel stop hinge.  Holds the lid at about 90 degrees.
HNG-19 measures 7/8" wide by 1-11/16" tall.  Attaches with four escutcheon pins (not included).
HNG-19  Two hinges for $7.50, USA shipping included.


Bright Brass Small Wine Box Hinges
hinges for wine boxes for salehinges for wine boxes for sale
HNG-18 is a small, brass-plated steel hinge for light weight box lids.  Great for wine boxes.
HNG-18 measures 5/8" wide by 2-11/16" tall.  Attaches with six escutcheon pins (not included).
HNG-18  Two hinges for $7.50, USA shipping included.



LEATHER HINGES
Great for some older boxes
Leather hingesLeather hinges for old boxes and cases
Sometimes you just flat out don't want a big metal hinge on a primitive box, so we have these pieces of leather that you can use instead.  Nail one end to the top of your box,
the other end to the bottom, as if you really needed us to tell you that.  You're smart.  You get it.  What you get here is a pair of rectangles,
each measuring about an inch wide by 2 and 3/8" long, die cut from a single layer of 8 oz cowhide.
Leather Hinges  $5 per pair  USA shipping included  HNG08

Please remember that our minimum order size is $5 - so you've got to purchase more than just a pair of these thingamabobs.
Don't want to use your credit card online?  No problem - you can print out our order form and mail or fax in your order

1940 CASE HINGES
Vintage case hinges
Nickel-plated steel hinges were made in the 1940s and were used on suitcases and small boxes.
Overall length is 3-1/4", width is 1-1/4".  The bottom part (longer end) is 2-3/16" long, the other
end (top) is 13/16" long.  HNG10  $8 per pair, USA shipping included


1940 CASE LIFT OFF HINGES
Easy lift off hinges for boxesHinges for small boxes
Nickel-plated steel hinges were made in the 1940s and were used on suitcases and small boxes.
These are called "lift off" hinges because you can remove the top half from the bottom half by guess what?  Lifting.
Dimensions as shown, sold per pair.  HNG11  $5 per pair, USA shipping included


21-1/2" LONG PIANO HINGES
Piano hinges for saleLong hinges
Long hinges like these are sometimes used on the back of wood boxes, or maybe your trunk is in rough shape back there so you need a hinge that attaches in many locations.
Here it is.  These are called Piano Hinges and are made of nickel plated steel.  Overall length of this hinge is 21 and 1/2 inches.  Overall width when opened flat is 1-1/2",
and there are holes for your fasteners every 2 inches across each leaf of the hinge.
Sold one at a time, or 'By the Each' as we say in Maine.  HNG-17 Piano Hinge, $12 each, USA shipping included.

Antique trunk hardware and parts for sale
Site Map