BRETTUNS VILLAGE TRUNK
SHOP
TRUNK METAL
Sheet Brass for the Edges
of Your Trunk

Our brass sheet is sturdy
enough to protect the edges of your trunk, but thin enough to be cut with
scissors and bent around
corners without too much
effort. Scuff it with steel wool and then it can be painted if you'd
like.
Our sheet brass is 30 gauge,
or 0.010" thick. Brass sheet is 12 inches wide, and sold
by the running foot ($15
per foot), and, like we've been doing since we first started this
dynamic corporation, USA
shipping is included in the price.
Example: A piece of
sheet brass measuring 12" wide by 36" long is 3 running feet and costs
$45, delivered to any USA address (yup, even AK, HI, and PR)
Please note: We cut
this to the measurements you provide - this item may not be returned for
refund or exchnage.
TRUNK LID DUST BANDING
Also known as Edge Banding


Steel dust banding is typically
used around the bottom edge of the trunk lid, helps to keep dust out of
the trunk. It can also be used as strapping to run across the lid
or up the front of the trunk.
Heck, it's up to you what
you do with it, we just sell it by the foot. This banding is black
steel, fairly easy to bend around corners, and is sold in two widths:
3/4 or 1-1/4 inches wide. Thickness is 0.031".
We have this priced per
running foot, shipping and handling are included, at least for destinations
in the USA.
This is not the same thing
as the thin metal that runs up the corners of your trunk - this only is
used on the lid or face of most trunks. If you need thin metal to
replace the old stuff on
the corners of your trunk we recommend that you scroll up this page a bit
to take a look at our brass sheet.
Again, this metal right
here is for the bottom edge of the trunk lid only.
Please measure carefully
- Dust Banding MAY NOT BE RETURNED because we cut it to the custom
length you request.
Note: See the nice
90-degree bend in the banding shown in the last photo? You too can
make sharp, snappy corners
like this - just clamp the
banding in a vise, bend by hand and then tap down with a hammer until you
have a right angle.
Please measure carefully
- Dust Banding MAY NOT BE RETURNED
3/4" wide Dust Banding,
Part number 34EB $2.00 per foot
1-1/4" wide Dust Banding,
Part number 125EB $2.50 per running foot
Please remember that our
minimum order size is $5
Please measure carefully
- Dust Banding MAY NOT BE RETURNED