Many styles available, including new old stock drawbolts from an old trunk factory - please
scroll down the page!
SMALL TRUNK HASPS or
It's hard to find hasps
that duplicate the older styles, but these aren't bad. Made from
brass or nickel-plated steel, then coated with a protective lacquer finish.
They measure 1 and 1/2 inches
wide by 2 and 3/4 inches tall when completely closed. Require 5 nails
per hasp to mount to your trunk.
These are sold by the pair:
You get two tops and two bottoms in each pair ($10.00 per pair).
Price includes postage for USA customers.
Item code = HASP1
Don't want to use your credit
You can print out our
form and mail or fax in your order
MEDIUM TRUNK HASPS or
This is HASP-14. These
measure 1 and 3/4 inches wide by 3 and 1/4 inches tall when completely
closed. Require 6 nails per hasp to mount to your trunk.
These are sold by the pair
($10.00 per pair -a pair is two complete hasps - two tops, two bottoms).
Choose Bright Brass or Antique Brass (sold out of nickel).
Price includes postage
for USA customers. Item code = HASP14 $10 per pair.
BLACK SMALL TRUNK HASPS
Black anodized drawbolts
are sold in sets of two (a pair). Same size as the ones (HASP-14)
We sell these in pairs (two
tops, two bottoms in each pack). Dimensions are as shown above.
Per pair: $10
(includes USA shipping)
Large Trunk Hasps or
Drawbolts - Bright Brass or Antique Brass
These are pretty big hasps,
useful for larger trunks and chests. Each hasp measures about 5 and
1/2" tall, 3" wide overall. Requires a total of 7 nails to attach
Brass or Antique brass plated
steel, heavy duty, built to last. The mounting plate for the top
part measures 2-15/16" wide by 2" tall; the mounting plate for the bottom
part is 2-15/16"
wide by 3" tall. These
are sold by the pair (two tops, two bottoms in each pair). Price
includes postage for USA customers. Item code = HASP2
Pair of Hasps $28.00
With a patent date of July,
1872, Taylor Trunk Co came out with this style of hasps and sold them to
many, many trunk makers across the USA.
The originals were made
of steel; these are solid cast brass and have a locking mechnism that locks/unlocks
with the little tab that
sticks out from the right
side of the hasp. Sold as a set of two hasps, and they do not come with
screws. Best to use nails on old trunks,
but we'll leave that critical
decision up to you. You can paint these if you get that kind of urge. Try to let it pass.
The top piece is 1-3/8"
tall (plus the little hook at the bottom sticks down another 3/8").
The bottom piece is 1-7/8"
wide by 1-3/4" tall.
1872 Hasps $18 per
pair (two tops, two bottoms) USA postage included. HASP3
THE MOTHER OF ALL HASPS
These babies are gigantic,
made from solid brass, and weigh in at 12 ounces each. A little over
7 inches tall by 3.5 inches wide, requiring a total of 8 nails to attach
to your trunk.
These are similar in design
to some hasps from the 1880s, with a spring steel piece inside that helps
the hasp snap shut.
Very heavy duty but with
a nice old look. Giant Hasps are priced at $48.00 per pair (that
means two tops, two bottoms), free shipping to any USA location.
Please get out your ruler
and check these dimensions against what you want for your trunk.
These things are huge - no kidding.
The top piece is 3-7/16"
wide by 3-7/8" tall. If you allow the bottom of this piece to extend
below the edge banding of the trunk by about 1/2" the top part needs a
space of at least 3 vertical inches to seat properly.
Item code = Hasp4
Pair of Hasps $48.00
When we say big we mean
Measure before you buy!
Old Stock Nielsen Hasps
These are original 1930s
nickel hasps that we purchased as part of an inventory close-out.
New old stock, so these will be a little dusty, but are in good condition
for their age
and easy to clean up.
Made by Nielsen, and each hasp bears the company name. Look right
at home on your trunk or case.
We sell these in pairs -
that means two tops, two bottoms. They're very well made, which one
would expect from that day and age,
measuring about 2.5 inches
tall by 1.5 inches wide when closed. The top plate is about 1-3/16"
wide by 13/16" tall and has two holes for nails, screws, or rivets.
Sold per set, two drawbolts
in a set. HASP12 $8 per set
Small Brass or Antique
Brass Plated Drawbolts
Small, plain brass or antique
brass plated steel hasps or drawbolts are useful on suitcases, smaller
trunks and boxes. Mount with five nails/screws/rivets each (not included).
Overall measurements are
1-1/4" wide by 2-9/16" tall. Sold in Pairs (the pictures above on
the left show a pair: two tops, two bottoms in each pack)
HASP7 $10/pair, USA
Nickel 151 Hasps or Drawbolts
Drawbolts like these were
commonly used on automobile trunks in the early to mid 1900s.
These come with two Excelsior
151 keys, and the drawbolts have 151 stamped into them.
They look nice, and are
accurate reproductions of the originals. Available in nickel-plated
Overall measurements of
the complete unit are about 1-5/8" wide by 3" tall.
HASP-11, sold per pair,
$25/pair, USA shipping included.
Teeny Tiny Closures for
Jewelry Boxes or Other Small Cases
These are original 1930s
plated steel box closures that are intended for very light duty use.
Attach with a total of 4 very small nails (NOT included)
New old stock, so these
will be a little grimy, dusty, or otherwise in need of a bath.
We sell these in pairs (total
of two tops, two bottoms, so each bag will close two boxes).
The larger half is 3/4"
by 1/2", and the little part with the nub on it is about 3/8" by 1/4".
Per pair: $5 (includes
Very SMALL Hasps, Nickel
Plated Steel Old Stock, Original 1920s
Made for use on small suitcases
and shoe boxes that went inside wardrobe trunks, these are old stock drawbolts
that we believe were made
in the 1920s or 30s. Quarter shown in the photo gives you an idea
of the size.
When closed, top and bottom
together have overall dimensions of 1-1/4" tall by 7/8" wide (at the top
- the widest spot).
The nail holes on these
aren't very big - looks like you'll need something just slightly bigger
than a straight pin to attach these to your project.
These are old stock, original
parts and have some dust, grime, and surface corrosion on them. They
clean up pretty easily.
This is HASP8, and we sell
packs of two of these (two tops, two bottoms) for $5 each, USA shipping
PURSE SNAP LOCKS
Small snap locks have prongs
on the back of the lock for easy mounting. The hasp has two 1/16"
holes in it - use your own mounting hardware. Dimensions are as shown.
Sold per pair (two tops,
two bottoms), with USA postage included in the price.
Purse Lock 1
$8 per pair
Foot Locker Hasps or
Brass, Nickel, or Old
You've seen this type of
draw bolt on trunks at Sears and Wards and Wal-Mart - it seems to us that
this style first showed up in the 1920s
and then gathered steam
in the 1950s. Sold in pairs - enough for one trunk (two tops, two
bottoms), in either nickel plated steel or brass plated steel.
Overall measurements of
the complete top/bottom are 5 inches tall by 2-3/4 inches wide. Requires
6 nails or rivets or whatever to attach.
HASP-18 $20 per pair,
USA shipping included. Choose brass or nickel-plated steel, or go
for the 'broken in' look with the Old Stock finish -
recovered from a former
trunk maker's factory building. The old stock ones have some rust
and discoloration - they look old. Very, very cool.
SMALL Locking Case Hasps
Stock Brass Plate Finish
These are old stock brief case or lunch box hasps that we recovered from an old suitcase factory in NYC, in old brass-plated steel.
Sold in sets - each set contains two tops, two bottoms, and two keys. The backplate is about 2-1/8" wide by 7/8" tall. SMALL!
HASP-19 $18 per pair, USA shipping included.
Nickel Case Hasps by Excelsior, New Old Stock!
Non-Locking, in Nickel Plate Finish
These are old stock trunk hasps (drawbolts) that we believe were made in the 1930s, in original nickel-plated steel.
Sold in sets - each set contains two tops and two bottoms. The backplate is about 1-3/4" wide by 3" tall.
HASP-20 $25 per pair, USA shipping included.
Snap Hasps or Tuck Locks
These are 1-inch snap hasps
(also known as tuck locks) that can be attached to your case with screws,
rivets, or nails. Nickel-plated steel.
We sell these in sets of
two complete snap hasps per pack (Note: each pack contains two tops, two
Tuck Clasps $5.00
100 packs for
1,000 packs for $200.00