Round Case Feet in Brass or Nickel Sets of 4 TFT04

New Stock Round Suitcase, Box, or Instrument Case Feet in Brass or Nickel, sold in sets of 4 for $6 flat, USA shipping included.  This is a new item for us, made recently (a lot of our inventory is dusty old stock stuff – these are “shiny new” as Aunt Barbara would say).  Choose brass or nickel plated steel.  Outside diameter is 3/4″ or about 18 mm. Split rivet shank, no caps included as these are just meant to be spread and then smacked into the wood or fiber board of your case.  We use a chisel with a tap of the hammer or two to get the little legs headed in the right direction – away from each other.  Then we bend/twist each leg of the split rivet with needle nose pliers to get them pointed back toward the case, and then we smack them flat with the hammer.  It’s easy.  OK, so the first one may challenge you, but by foot number 3 you’re an expert. The shank and split rivet end of these feet extends 1/2″ below the rounded foot’s bottom edge. TFT-04, brass or nickel, $6 per set of 4, free USA shipping.