Handle Mounting Hardware Brass-plated steel suitcase
handle brackets are easy to attach - just drill 4 holes, attach the brackets
with the screws (included), and then attach your handle
using the threaded pins
(also provided). What you see in the picture is what you get.
These brackets will accomodate
a handle up to 3/4 of an inch wide (which means all of our replacement
handle styles).
Mounting screws are spaced
7/8" on center.
SCHBrkt-01 $10 per
set
Free Shipping to any USA
location
Antique brass finish handle
brackets, complete set includes mounting screws, washers, and handle pins.
These brackets will accomodate
handles up to 3/4" wide.
Mounting screws are spaced
1" on center.
SCHBrkt-02 $10 per
set
Free Shipping to any USA
location
Don't want to use your credit
card online?
No problem - you can call
your order in, toll-free, to pay with Visa/MC/Amex: 1-877-532-8424
Or you can print out our
order
form and mail or fax in your order
Polished brass finish brackets
will accomodate handles up to 3/4" wide.
Complete set includes mounting
screws and handle pins.
Handle pins are rather thick;
will only fit through our replacement handle styles SCH-02, SCH-24, and
SCH-25.
Mounting screws are spaced
5/8" on center. Screws are only 7/32" long (just under 1/4").
SCHBrkt-03 $10 per
set
Free Shipping to any USA
location
Black finish brackets come
in a set that's got everything you need to attach these to your case.
Mounting screws, washers,
and handle pins included.
Mounting screws are spaced
1" on center.
SCHBrkt-04 $10 per
set
Free Shipping to any USA
location
Nickel silver finish brackets
come in a set that's got everything you need to attach these to your case.
Mounting screws, washers,
and handle pins included.
Mounting screws are spaced
1" on center.
SCHBrkt-05 $10 per
set
Free Shipping to any USA
location
D-Ring Loops These sets come with what
you see - two brackets and two d-rings in each set,
and you can choose brass
or nickel plated steel. DImensions are as shown on the photo.
These are sturdy and rather
large - attach them with screws or rivets (not included)
D-Ring Loop Set LOOP8
Please
select:
Snap Hasps
or Tuck Locks These are 1-inch snap hasps
(also known as tuck locks) that can be attached to your case with screws,
rivets, or nails. Nickel-plated steel.
We sell these in pairs if
you just need enough for one briefcase, or you can buy 100 clasps (50 briefcases
worth) or 1000 clasps (500 briefcases):
Tuck Clasps $4 per
pair
100 clasps (50 pairs)
for $24
1,000 clasps (500 pairs)
for $200
Please
select:
Original Old Stock 1930s Scissor Lid Stays for
Brief Cases, Small Trunks, Etc.
Measures 4 and 5/8 inches
loing overall, distance between nail holes is about 4 and 1/4". This
stay is offset about 1/4 of an inch, so the hinge part won't rub
against the inside of your
trunk or box. Brass plated steel. These are original old stock
stays, made in the 1930s. Built to last. Can't buy 'em anywhere
else.
Price includes shipping
for USA locations.
1930sSTAY $4 each
Original Old Stock 1930s Large Scissor Lid Stays
for Trunks, Boxes, Etc.
Large, nickel-plated steel
lid stays work well on larger suitcases, boxes, and trunks. These
lock lightly into position with a small ball bearing - they are not technically
'locked'
into position but hold well.
The lid will still come down if pushed, so please don't think these are
just the thing to protect the fingers of your future virtuoso when he gets
the
notion to slam the lid of
his toybox. Distance between nail holes is 6 and 5/8 inches when
opened fully. These were made in the 1930s and are original old stock,
never used.
Price includes shipping
to any USA location.
1930s Large Scissor Stay
$5 each
Old Stock Hinges These are original 1930s
hinges that we purchased as part of an inventory close-out. New old
stock, so these will be a little grimy,
may have some surface rust,
but are in good condition for their age. Look right at home on your
trunk or case.
Old hinges are brass-plated
steel measuring 5.5 inches long total length, 1 and 1/8" inch wide.
These can be used on trunks or suitcases. The hinges have rounded
'feet'
on each end to help your
suitcase stand up correctly, or ignore the feet and use them on the back
of a trunk.
Raised edges keep the body
of this hinge elevated about 1/8th of an inch from the trunk body.
Very well made, original hinges from the 1930s, not reproductions.
1930s Raised Hinges
$6 per pair
Free shipping to any USA
location
Seymour Hinges, Original
Old Stock from the 1930s Old stock hinges made by
Seymour Co. for use on smaller trunks and cases. These are brass
plated steel and require 5 nails to attach. We sell them in pairs.
Each hinge is 3.25" long
overall by 7/8" wide. The longer end is 2.5" long, the other end
is about 15/16" long.
Sturdy hinges that have
a built in 'stop' at 90 degrees, so the lid can't go any further than that.
1930s Seymour Hinges
$6 per pair
Free shipping to any USA
location
Don't want to use your credit
card online?
No problem - you can call
your order in, toll-free, to pay with Visa/MC/Amex: 1-877-532-8424
Or you can print out our
order
form and mail or fax in your order
Nickel-Plated or Brass
Plated Old Stock Hinges Original old stock hinges
from the 1930s, never been used
These hinges work well on
brief cases, suitcases, and small trunks, which is how they were being
used in the factory where we bought them.
Measuring 3.25 inches long
by 1.125 (1 and 1/8) inches wide, and they have a 'bump' on them that serves
as a foot for the case when stood on end.
Made in the 1930s, original
old stock. These are not reproductions. Available in a limited
supply and when they're gone they're gone.
Choose nickel or brass plated,
sold by the pair for $8.00, which includes postage to any USA location.
Brass Foot Hinges, $8.00
per pair
Nickel Foot Hinges, $8.00
per pair
Please
choose:
HASPS
SMALL TRUNK
HASPS or DRAWBOLTS It's hard to find hasps
that duplicate the older styles, but these aren't bad. Made from
brass or nickel-plated steel, then coated with a protective lacquer finish.
They measure 1 and 1/2 inches
wide by 2 and 3/4 inches tall when completely closed. Require 5 nails
per haspto mount to your trunk.
These are sold by the pair.
Price includes postage for USA customers.
Item code = HASP1
Pair of Nickel Hasps $6.00
Pair of Brass Hasps
$6.00
Please
choose:
Don't want to use your credit
card online?
No problem - you can call
your order in, toll-free, to pay with Visa/MC/Amex: 1-877-532-8424
Or you can print out our
order
form and mail or fax in your order
NICKEL BRIEFCASE OR SUITCASE
HASP LOCKS These are reasonable quality
suitcase locks with a shiny nickel finish (silver color).
Dimensions are as shown.
Sold in pairs, two locks, two hasps, and two keys. You'll have to
use your own mounting hardware.
Nickel Briefcase Locks
$12 per pair
Price includes USA postage
- no other charges or fees to add
BRASS PLATED BRIEFCASE
OR SUITCASE HASP LOCKS These are reasonable quality
suitcase locks with a shiny nickel finish (silver color).
Dimensions are as shown.
Sold in pairs, two locks, two hasps, and two keys. You'll have to
use your own mounting hardware.
These are old stock, never
used, but they've been stored a long time and have some scratches on the
surface.
Sold per pair, two locks,
two hasps, and two keys in each set.
Brass Briefcase Locks
$10 per pair
PURSE SNAP LOCKS Small snap locks have prongs
on the back of the lock for easy mounting. The hasp has two 1/16"
holes in it - use your own mounting hardware. Dimensions are as shown.
Sold per pair, with USA
postage included in the price.
Purse Snap Locks
$5 per pair
Price includes USA postage
- no other charges or fees to add.
Old Stock Oblong Feet Brass or Nickel These are original 1930s
oblong case feet (also known as bumpers) that we purchased as part of an
inventory close-out.
New old stock, so these
will be a little grimy but are in good condition for their age. Look
right at home on your trunk or case.
These oval shaped feet are
original equipment, used on smaller trunks and cases in the early to mid
1900s. We have them in nickel-plated steel or brass-plated steel,
sold in sets of 4 for $5 per set.
Each foot measures about
1.5" long by 3/8" wide, mounts with a single nail, and has prongs on the
upper side to keep them seated against the trunk or case so they don't
spin around.
Brass Plated Old Stock Oblong
Feet - $5 per 4
Nickel Plated Old Stock
Oblong Feet - $5 per 4
Please
select
Larger groups are available
- to inquire about buying these by the 100 just send
an e-mail.
1920s Original Old Stock
Suitcase or Trunk Round Feet with split rivets for easy
mounting!
Round feet lift your case
or trunk off the floor by about 1/2" and are available in three finishes:
nickel, brass, or black.
The nickel feet are largest,
measuring 1-inch in diameter by 9/16" tall. The split rivet post
is 5/32" in diameter and extends beyond the base of the foot by 5/16".
The brass feet are in the
middle, at 7/8" dia. and 7/16" tall. The rivet post is 5/32" in dia.
and extends 5/16" beyond the base of the foot.
The black steel feet are
smallest, at 1/2" diameter by 5/16" tall. The split rivet is 5/32"
dia and extends beyond the base of the foot by 5/8".
All of these can be mounted
by hammering them into place thorugh wood, but they work best when installed
by sticking the rivet through a hole in metal,
then splitting open the
rivet inside the case or trunk to hold it in place. Caps for the
rivet prongs are included.
We sell these in sets of
4 for $5 per set, and this includes postage to any USA location.
Made in the 1920s, original old stock that have never been used.
Old Stock Round Feet Nickel (large): $5 per set
of 4
Brass (Medium): $5
per set of 4
Black (Small): $5
per set of 4
Please
select
Larger groups are available
- to inquire about buying these by the 100 just send
an e-mail.
Rivet caps included just
in case you feel like using them
Rubber Feet or Bumpers These came out of the same
old trunk/case factory as the parts shown above - just plain old black
rubber feet, 1/2" in diameter, with a nail sticking out of the flat side.
Just nail them in.
Small size is good for smaller boxes and cases, maybe doll trunks too.
Or nail one to your forehead if you've been drifting off to sleep at work
lately;
the bumper will bounce your
head back into an upright position at the exact moment your boss walks
by your cubicle. Not guaranteed.
Rubber Feet 12 for
$5.00, free shipping to any USA location
Large lots of any of the styles shown
above are available. If you need 100 or more of any of these parts
please e-mail us and let us know which style numbers you'd
like to purchase. We'll discount the price for you. - Return
to the Parts Index -
