BRETTUNS VILLAGE TRUNK SHOP

REPLACEMENT PARTS FOR LUGGAGE AND VINTAGE PURSES,
SUITCASES, BAGS, VALISES, GLADSTONES, BRIEF CASES, DOCTOR'S BAGS, ETC.
Luggage Repair Parts for sale

Looking for suitcase handles? Click Here


Handle Mounting Hardware


suitcase handle mounting hardware - old brass
Antique brass finish handle brackets, complete set includes mounting screws, washers, and handle pins.
These brackets will accomodate handles up to 3/4" wide.
Mounting screws are spaced 1" on center.
SCHBrkt-02  $10 per set  Shipping to any USA location included.

Don't want to use your credit card online?
No problem - you can print out our order form and mail or fax in your order

suitcase handle black mounting hardware
Black finish brackets come in a set that's got everything you need to attach these to your case.
Mounting screws, washers, and handle pins included.
Mounting screws are spaced 1" on center.
SCHBrkt-04  $10 per set  Shipping to any USA location included.


suitcase handle nickel mounting hardware
Nickel silver finish brackets come in a set that's got everything you need to attach these to your case.
Mounting screws, washers, and handle pins included.
Mounting screws are spaced 1" on center.
SCHBrkt-05  $10 per set  Shipping to any USA location included.


suitcase handle mounting hardware - gunmetal
Gunmetal finish handle brackets (dark gray-black), complete set includes mounting screws, washers, and handle pins.
These brackets will accomodate handles up to 3/4" wide.  The pins on these push into place, which
means you tap them in with a hammer, gently.  Mounting screws are spaced 1" on center.
SCHBrkt-06  $10 per set  Shipping to any USA location included.

Here's a photo that shows you the realtive sizes of Bracket Styles 1-5 and Bracket Style 6
handle brackets for sale



D-Ring Loops
suitcase handle mounting hardwaresuitcase handle mounting hardware
These sets come with what you see - two brackets and two d-rings in each set,
and you can choose brass or nickel plated steel.  DImensions are as shown on the photo.
Hole spacing center to center is 15/16".
These are sturdy and rather large - attach them with screws or rivets (not included)
D-Ring Loop Set  LOOP8
Please select:

Shipping to any USA location included.

The Big Boys
When your trunk or bag or case or crate weighs a lot
heavy duty handle hardware with heavy gauge ringsSturdy handle mounting hardware for large boxes, cases, and trunks
These giant d-rings sets are reported by the maker to have a breaking strength of 700 pounds, but a working load of 200 pounds.
Each set contains what you see in the pictures (except the quarter)(isn't it weird we have to point that out so that we don't get sued
by someone who really just wanted the quarter?).  Overall dimensions of each ring/bracket pair is 1-7/8" by 1-7/16".  No mounting
fasteners are included - you need to supply your own.  Our Binder Posts/Chicago Screws work well (over on the Nails page), or use your own bolts.
Nickel plated, so they have a shiny silver look to them.  LOOP-12  2 rings, 2 brackets per set, $12 flat, USA shipping included.


Snap Hasps or Tuck Locks
snap hasps or tuck locks for bags and casessnap hasps or tuck locks for bags and cases
These are 1-inch snap hasps (also known as tuck locks) that can be attached to your case with screws, rivets, or nails.  Nickel-plated steel.
We sell these in sets of two complete snap hasps per pack (Note: each pack contains two tops, two bottoms)
Tuck Clasps  $5.00 per pack      100  packs  for $40.00     1,000 packs for $200.00
Please select:

Shipping to any USA location included.


Original Old Stock 1930s
Scissor Lid Stays for Brief Cases, Small Trunks, Etc.
Brass or Nickel finish
Lid brackets or stays for cases or boxessmall stay - Lid brackets or stays for cases or boxesLid brackets or stays for cases or boxes
Measures 4 and 5/8 inches loing overall, distance between nail holes is about 4 and 1/4".  This stay is offset about 1/4 of an inch, so the hinge part won't rub
against the inside of your trunk or box.  Brass plated steel or nickel plated steel - your choice - same price.
These are original old stock stays, made in the 1930s.  Built to last.  Can't buy 'em anywhere else.
Price includes shipping for USA locations.  Stay5  $5 each
Finish


Original Old Stock 1930s
Large Scissor Lid Stays for Trunks, Boxes, Etc.
case or box lid bracket stay holdersuitcase or box lid holder
Large, nickel-plated steel lid stays work well on larger suitcases, boxes, and trunks.  These lock lightly into position with a small ball bearing - they are not technically 'locked'
into position but hold well.  The lid will still come down if pushed, so please don't think these are just the thing to protect the fingers of your future virtuoso when he gets the
notion to slam the lid of his toybox.  Distance between nail holes is 6 and 5/8 inches when opened fully.  These were made in the 1930s and are original old stock, never used.
Price includes shipping to any USA location.  1930s Large Scissor Stay  $5 each



Nickel-Plated Old Stock Hinges
Original old stock hinges from the 1930s, never been used
suitcase hinges, vintagesuitcase hinges, vintage
These hinges work well on brief cases, suitcases, and small trunks, which is how they were being used in the factory where we bought them.
Measuring 3.25 inches long by 1.125 (1 and 1/8) inches wide, and they have a 'bump' on them that serves as a foot for the case when stood on end.
Made in the 1930s, original old stock.  These are not reproductions.  Available in a limited supply and when they're gone they're gone.
Only nickel available - sold out of brass.  Sold by the pair (two complete hinges) for $8.00, which includes postage to any USA location.
Nickel Foot Hinges, $8.00 per pair    HNG-03


HASPS


SMALL TRUNK HASPS or DRAWBOLTS
Trunk hasps or drawboltsTrunk hasps or drawbolts
It's hard to find hasps that duplicate the older styles, but these aren't bad.  Made from brass or nickel-plated steel, then coated with a protective lacquer finish.
They measure 1 and 1/2 inches wide by 2 and 3/4 inches tall when completely closed.  Require 5 nails per haspto mount to your trunk.
These are sold by the pair.  Price includes postage for USA customers.
Item code = HASP1         Pair of Nickel Hasps  $6.00     Pair of Brass Hasps  $6.00
Please choose:

Don't want to use your credit card online?  No problem - you can print out our order form and mail or fax in your order

BRASS OR NICKEL PLATED BRIEFCASE OR SUITCASE HASP LOCKS
brief case locks for saleNickel brief case locks for sale
brief case locks for salebrass brief case locks for sale
These are reasonable quality suitcase locks available with your choice of a shiny nickel finish (silver color) or brass finish (shiny gold)
Dimensions are as shown.  Sold in pairs, two locks, two hasps, and two keys.  You'll have to use your own mounting hardware.
Brass or Nickel Briefcase Locks
$15 per pair (per pair means two locks, two dangly hasps, and two keys - enough for one brief case)
Finish

Price includes USA postage - no other charges or fees to add


PURSE SNAP LOCKS
purse snap locks for salepurse snap locks for sale
Small snap locks have prongs on the back of the lock for easy mounting.  The hasp has two 1/16" holes in it - use your own mounting hardware.  Dimensions are as shown.
Sold per pair (two tops, two bottoms), with USA postage included in the price.
Purse Lock 1    $8 per pair


Old Stock Oblong Feet
Brass or Nickel
These are original 1930s oblong case feet (also known as bumpers) that we purchased as part of an inventory close-out.
New old stock, so these will be a little grimy but are in good condition for their age.  Look right at home on your trunk or case.
box or suitcase feet, brass or nickel
These oval shaped feet are original equipment, used on smaller trunks and cases in the early to mid 1900s.  We have them in nickel-plated steel or brass-plated steel, sold in sets of 4 for $5 per set.
Each foot measures about 1.5" long by 3/8" wide, mounts with a single nail, and has prongs on the upper side to keep them seated against the trunk or case so they don't spin around.
TFT-02  Brass or Nickel  Plated Oblong Feet - $10 per 4
Colors:

Larger groups are available - to inquire about buying these by the 100 just send an e-mail.

1920s Original Old Stock Suitcase or Trunk Round Feet
with split rivets for easy mounting!
box or suitcase feet, brass, black, or nickelbox or suitcase feet, brass, black, or nickel
Round feet lift your case or trunk off the floor by about 1/2" and are available in three finishes:  nickel, brass, or black.

The nickel feet are largest, measuring 1-inch in diameter by 9/16" tall.  The split rivet post is 5/32" in diameter and extends beyond the base of the foot by 5/16".
The brass feet are in the middle, at 7/8" dia. and 7/16" tall.  The rivet post is 5/32" in dia. and extends 5/16" beyond the base of the foot.
The black steel feet are smallest, at 1/2" diameter by 5/16" tall.  The split rivet is 5/32" dia and extends beyond the base of the foot by 5/8".
All of these can be mounted by hammering them into place thorugh wood, but they work best when installed by sticking the rivet through a hole in metal,
then splitting open the rivet inside the case or trunk to hold it in place.  We sell these in sets of 4 for $10 per set, and this includes postage to any USA location.
Made in the 1920s, original old stock that have never been used.  Old Stock Round Feet TFT-03 $10 per set of 4 in any of the 3 colors

Colors:

Larger groups are available - to inquire about buying these by the 100 just send an e-mail.


Rubber Feet or Bumpers
rubber bumper feet on tacks for boxes
These came out of the same old trunk/case factory as the parts shown above - just plain old black rubber feet, 1/2" in diameter, with a nail sticking out of the flat side.
Just nail them in.  Small size is good for smaller boxes and cases, maybe doll trunks too.  Or nail one to your forehead if you've been drifting off to sleep at work lately;
the bumper will bounce your head back into an upright position at the exact moment your boss walks by your cubicle.  Not guaranteed.
Rubber Feet  12 for $10.00, USA shipping  included.



Large lots of any of the styles shown above are available.  If you need over $1000 worth of any of our parts please
click here to learn more about our Wholesale program.

- Return to the Parts Index -